Pressure Atomizing spray Drier drying machine drying equipment

stainless steel SUS304, 316, 316L

Pressure Atomizing spray Drier drying machine drying equipment

The principle of this dryer is cooling liquid material directly into ball-shape granule.After 100mesh filtering, the raw material is feed to high-pressure nozzle and dispersed into revolving hollow droplets. The droplets contact with inlet air and exchange heat instantly forming granule products. Most of the big granule are collected in the tower bottom under gravity; micro granule and waste gas are collected by cyclone. After secondary dedusting device separation, the waste gas will be exhausted by fan. The recovery proportion could be 96-98%

  The atomizing granulating is fulfilled by concurrent pressure, so the customer can get different granule size by adjusting spouting liquid and nozzle size, solution concentration, or additive. Upstream spray and convection can be available according to different materials 

High-speed Granulating, 5-30 seconds,instant modelingSuitable for heat sensitive material,color,flavor,taste remained.Simple operation and control, good for continuously control production Product with good decomposition, flowability and solubility

Type Spec &Parameter	YPG-25	YPG-50	YPG-100	YPG-150	YPG-200	YPG-300
Max capacitykg/h	25	50	100	150	200	300
inlet temp(T)	180-350
outlet temp(T)	90-100
Purification of inlet air	GMP standard
Atomizing pressure MPa	2-20 according to material requirements
Product collection	Gas-solid separator, one or two discharger
Refrigeration	Cold saltwater+heat exchangernatural windcold water+heat exchanger,etc
Control meter	Hot air and exhaust air control indicator, feeding pump poleless regulation and other technical parameters interlock.

Note1.Capacity is related with material features and cold air inlet/outlet temp, above data is for reference only

2. Except for above mentioned, the type can also be designe

Pressure Atomizing spray Drier drying machine drying equipment